MCTRON's line of construction products allows end-use customers and formulators to create consistent, high quality products. Our Maxxacryl® and Maxxetate® polymers, MaxxThix® rheology modifiers, and MaxxBreak® antifoams make up a complete solution for the construction products professional.

Learn more about our products for the construction industry:

null

Caulks and Mastics

MCTRON is a leading producer of emulsion polymers with a comprehensive line of acrylic, styrene-acrylic, vinyl-acrylic and vinyl-acetate products for use in caulk and mastic applications. We formulate strong, elastomeric products with superior aging characteristics. MaxxThix® rheology modifiers allow formulators to create stable viscosity products that perform consistently and reliably.

MAXXACRYL
  • null

    Maxxacryl® SA-292

    Maxxacryl® SA-292 emulsion is a formaldehyde-free, carboxylated, styrene-acrylic copolymer emulsion. The emulsion films are very soft and exhibit excellent resistance to discoloration. These films are also characterized by their superior water resistance. Use this product where flexibility, water resistance, and superior aging characteristics are required.

  • null

    Maxxacryl® AC-3025

    Maxxacryl® AC-3025 is a high-solids acrylic emulsion polymer that provides excellent adhesion properties, high pigment-binding capacity, and durability. It dries clear, has excellent water resistance, good gloss, and is compatible with a many other formulating ingredients such as fillers, pigments, and dyes.

  • null

    PermaPel® SRN020

    PermaPel SRN020 emulsion is a very soft, non-tacky binder that is a self-crosslinking. carboxylated, styrene-acrylic copolymer emulsion. Films of this emulsion are very soft and exhibit excellent resistance to discoloration.

MAXXTHIX
  • null

    MaxxThix® MT-4

    MaxxThix® MT-4 thickener is a high efficiency alkali-swellable emulsion thickener for use in emulsion polymer compounds. Applications include mastics and high viscosity compounds. The rheology of MaxxThix MT-4 thickener is short and buttery.

  • null

    MaxxThix® AT-17

    MaxxThix® AT 17 is an associative thickener, supplied as an easy-to-use alkali-swellable emulsion. It is designed for coatings with a “yield point” which flow readily under shear (such as brushing) yet which will not run (sag) when the shear is removed. Dyes thickened slightly with this product will not bleed through a paper towel. It keeps coatings on the surface of a substrate (minimal penetration).

MAXXBREAK
  • null

    MaxxBreak® OB-396 NS

    MaxxBreak® OB-396 NS is a defoamer designed specifically for latex paints and adhesives; however, it has extremely universal use in defoaming applications.

  • null

    MaxxBreak® SE-030

    MaxxBreak® SE-030 is an aqueous organo-silicone defoaming/antifoam emulsion formulated for a variety of industrial processing applications. It contains hydrophobic particles coupled with proprietary defoaming surfactants and spreading agents that facilitate penetration of the foam lamella, causing rapid drainage of the thin film and foam destabilization.

MAXXSPERSE
  • null

    MaxxSperse® 3000

    MaxxSperse® 3000 is a sodium polyacrylate dispersant that provides stability to dispersions at low dosages. It is designed to disperse finely divided solids into a liquid medium (water or mixtures of water and water-miscible solvents).

null

Coatings

Maxxacryl® and Maxxetate® emulsion polymers create the base for MCTRON’s comprehensive coatings product lines. Process aids including MaxxBreak® defoamers, and rheology modifiers in our MaxxThix® line allow formulators to fine-tune coatings for demanding technical needs.

MAXXACRYL
  • null

    Maxxacryl® AC-3164

    Maxxacryl® AC-3164 is a tacky elastomeric acrylic polymer. Coatings formulated with this product have good adhesion to both polar and non-polar substrates. It has excellent low-temperature performance, and adds flexibility to harder polymers. It is tacky at room temperature, allowing it to be utilized for dust collection applications.

  • null

    Maxxacryl® SA-292

    Maxxacryl® SA-292 emulsion is a formaldehyde-free, carboxylated, styrene-acrylic copolymer emulsion. The emulsion films are very soft and exhibit excellent resistance to discoloration. These films are also characterized by their superior water resistance. Use this product where flexibility, water resistance, and superior aging characteristics are required.

  • null

    PermaPel® WG-84

    PermaPel® WG-84 is a non-blocking MCTRON polymer designed to incorporate our wash-durable specialty monomer technology into a typical RC (rheology-controlled) polymerization system with the addition of a non-formaldehyde generating crosslinking system. The RC technology has historically been used in floor polishes, graphic arts polymers and overprint varnishes. It has superior adhesion with hard to low energy substrates such as fiberglass, plastic film, foil and galvanized aluminum. It also exhibits excellent oil and grease resistance achieving Kit values exceeding 12 when a continuous film is applied to paperboard. It also has excellent Cobb values.

MAXXTHIX
  • null

    MaxxThix® MT-4

    MaxxThix® MT-4 thickener is a high efficiency alkali-swellable emulsion thickener for use in emulsion polymer compounds. Applications include mastics and high viscosity compounds. The rheology of MaxxThix MT-4 thickener is short and buttery.

  • null

    MaxxThix® AT-17

    MaxxThix® AT 17 is an associative thickener, supplied as an easy-to-use alkali-swellable emulsion. It is designed for coatings with a “yield point” which flow readily under shear (such as brushing) yet which will not run (sag) when the shear is removed. Dyes thickened slightly with this product will not bleed through a paper towel. It keeps coatings on the surface of a substrate (minimal penetration).

MAXXSPERSE
  • null

    MaxxSperse® 3000

    MaxxSperse® 3000 is a sodium polyacrylate dispersant that provides stability to dispersions at low dosages. It is designed to disperse finely divided solids into a liquid medium (water or mixtures of water and water-miscible solvents).

null

Adhesives

MCTRON’s proprietary PermaPel® binder technology is a state-of-the-art base for high performance adhesives. Offering superior adhesion on hard to wet substrates including Galvalum and glass, PermaPel® delivers highly water resistant performance. Combined with our Maxxacryl® emulsions MCTRON is ready to provide a full line of emulsion solutions to adhesives producers.

null

HVAC

Helping HVAC companies formulate the best products is our specialty. Maxxacryl® and Maxxetate® polymers help chemical formulators create high value products custom formulated for their market focus. MaxxThix® Rheology Modifiers ensure that duct liner adhesives and mastics are easy to apply and stay where needed.

null

Concrete Additives

MCTRON polymers allow concrete companies and contractors to modify concrete admixtures to increase durability, strength, and flexibility. Maxxacryl® flexibilizers help concrete companies produce the best quality products for their customers.